Use Pen drive As RAM !!

Posted by SantY in , , on Tuesday, June 14, 2011


... yes it is possible all the memory available in a removable pendrive/USB can be converted into RAM to increase the working speed of the computer.


Method 1 : Manual Method to Convert USB/Pendrive Into RAM ...

Here is the required procedure for converting USB/pendrive memory into RAM manually…

1) Plug your pendrive into PC/laptop.

2) Right Click On My Computer.

3) Open up properties.

4) Go to Advanced Option.

5) Now select Settings of Performance.

6) Again Click on the Advanced Button which is shown In the popup Window.

7) Now click on Change button shown in Virtual memory.

8) Now select the available memory of your removable USB/Pendrive.

9) Set the value and apply the changes.




10) Restart your PC/Laptop and Thus you are done.

___________________________________________________________________________________________



Method 2 : Using eBoostr Software to Convert USB/Pendrive into RAM ...

A clean software is also present for this purpose which is known as eBoostr, It will convert your removable device memory into RAM and thus computer speed will be increased to a large extent.


After Downloading Just Run it and Use as its usage is quite simple that’s why no guide is necessary for it.


The software is very handy in the sense that it is just 5MB to download. It supports Windows XP, Windows 2000 and Windows 2003 and is available in 36 languages. It requires USB 2.0 drive or memory card for operation and USB 1.1 is not supported as they tend to be very slow and don’t work at required speed. So, in short Pentium four is better for its usage. :)

No Comments

Bandwidth Stealer For Fast Browsing (using netcut v2.8)

Posted by SantY in



If you are in your school's computer lab or in home , this software will always help you in your work . It is common thing to have many computer's connected with one device for internet and it causes your bandwidth to fall down . Here is a software called netcut which cuts the one's connection in such a crucial condition.When it cuts the one's connection , it automatically increases bandwidth of your connection which will let you work more easily and fastly.


___________________________________________________________________________________________


Using Netcut :-

1: Download net cut.

2: Extract the software and install it.

3: Now open netcut software and a window will pop-out showing you connected routers.

4:  Just toggle to the computer which you want to cut off like this photo:



5: And that's it.Now you are free to eat up every last bit of bandwidth. Enjoy :)

No Comments

How To: 'Invite All' Facebook Friends To Your Page With 'One Click'

Posted by SantY in on Thursday, January 27, 2011

You really need this when you are having more than enough friends on Facebook which you can click one by one and invite to you page or any other page you want to and always end up in getting fed up and leaving things up. There have been some javascripts to perform this task but somehow they are not working anymore and people are looking for new alternatives and that is what has made me write this article so, enjoy!


For Google-Chrome Users : 


Actually, this works with a chrome extension which is quite helpful and exact in performing this particular task. Below I am giving you the explanation about how to use this extension. This extension adds a “Toggle all” friends button to facebook groups, events, and pages invite boxes, which lets you select all of your friends in 'one click'.

  1. Download the extension from Here.
  2. Install the extension and leave it as it is as it does not require any configurations.
  3. Now go to the facebook page for which you want to suggest to friends and click on "suggest to friends” option.
  4. Now as you can see in the image below, you will see one option as “Toggle all” and all you have to do is to click on that option and it will automatically select all friends and then you can click on “Send Invitation”.

That is really easy! 

You can test it by joining "Computer Hacks n' Tips" Facebook Page and try inviting your friends to check if it works or not !!




For Mozilla-FireFox Users :


1. Download And Install Greasemonkey Plugin For Mozilla Firefox Web Brower.

2. After Installing GreaseMonkey Plugin, Install Select All Facebook Friends Greasemonkey Script ( If You are Using  Google Chrome 4.0+ Then you can directly install greasemonkey script without downloading the above plugin )


3. Now Go to Any Facebook Fan page or group after installing the script  and you will see something like :




You Will Notice Start and End. Now you need to enter the number in this field to select all your Facebook friends and as you can see i have entered 0 to 585 and after that click on “Select Friends” and this will select all your Facebook friends according to the number which you have set in Start and End. Now Click on Send Invitations to Invite All your Facebook friends.

So if JavaScript Code is Not Working for you also then this is the best and easiest way to invite all your Facebook Friends at once. 

No Comments

Counter Strike n' Condition Zero | Commands

Posted by SantY in on Tuesday, January 25, 2011





NOTE : These are the main Counter-Strike: Condition Zero cheats that are usually applied by pressing down the right key combination.

Please find the instructions on how to use these cheats below....

Access the console by pressing [~]. Type "sv_cheats 1" and then "restart" to enable cheat mode.
When the mission restarts, press [~] again, then enter one of the following codes to activate the corresponding cheat function:


god - God mode
fly - Flight mode
noclip - Free movement
notarget - Enemies cannot see you
impulse 101 - Get some weapons
give <name> - Spawn an indicated item (see the list below)
bot_kill - Kill all bots
bot_kill <bot name> - Kill specified bot
bot_stop 1 - Freeze all bots
bot_stop 0 - Unfreeze all bots
mp_freeztime <#> - Freeze indicated time except for player
mp_startmoney <0-16000> - Set starting money
sv_gravity <number> - Set gravity
bot_allow_rogues 0 - Teammates always follow your orders
bot_defer_to_human 0 - Teammates will accomplish goals themselves
bot_defer_to_human 1 - Bots will accomplish goals themselves
bot_difficulty # - Set bot skill level to # (number 0-3)
restart - Restart map with goals intact
maps * - List all maps
changelevel <map name> - Change map
cl_levellocks 16382 - All deleted scenes missions
sv_restart 1 - Restart round
sv_restartround 1 - Restart round
sv_ - List all available codes


Item names : weapon_ak47, weapon_aug, weapon_awp, weapon_deagle, weapon_elite, weapon_famas, weapon_fiveseven,
weapon_g3sg1, weapon_glock18, weapon_m3, weapon_m4a1, weapon_mac10, weapon_mp5navy, weapon_p228,
weapon_p90, weapon_scout, weapon_sg550, weapon_sg552, weapon_tmp, weapon_ump45, weapon_usp, weapon_xm1014


*IMP : If u r playing online n u r admin den use all above commands by adding prefix 'amx_rcon <command_name>'

or if u knw the 'rcon' then say 'rcon_password <password>' ,, now u can use all above listed commands by simply addind prefix 'rcon' !!

No Comments

How to Use Windows 7 Without Activation

Posted by SantY in


Most of you might be aware of the fact that it is possible to use Windows 7 and Vista for 120 days without activation. This is actually possible using the slmgr -rearm command which will extend the grace period from 30 days to 120 days. However in this post I will show you a small trick using which it is possible to use Windows 7 without activation for approximately an year! Here is a way to do that.

1. Goto “Start Menu -> All Programs -> Accessories” . Right click on “Command Prompt” and select “Run as Administrator“. If you are not the administrator then you are prompted to enter the password, or else you can proceed to step-2.

2. Now type the following command and hit enter

slmgr -rearm

3. You will be prompted to restart the computer. Once restarted the trial period will be once again reset to 30 days. You can use the above command for up to 3 times by which you can extend the trial period to 120 days without activation.

4. Now comes the actual trick by which you can extend the trial period for another 240 days. Open Registry Editor (type regedit in “Run” and hit Enter) and navigate to the following location

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\SoftwareProtectionPlatform

5. In right-side pane, change value of SkipRearm to 1.

6. Now you will be able to use the slmgr -rearm command for another 8 times so that you can skip activation process for another 240 days. So you will get 120 + 240 = 360 days of free Windows 7 usage.

120 days using “slmgr -rearm” command before registry edit

+

240 days using “slmgr -rearm” command after registry edit

= 360 Days

No Comments