Use Pen drive As RAM !!


... yes it is possible all the memory available in a removable pendrive/USB can be converted into RAM to increase the working speed of the computer.


Method 1 : Manual Method to Convert USB/Pendrive Into RAM ...

Here is the required procedure for converting USB/pendrive memory into RAM manually…

1) Plug your pendrive into PC/laptop.

2) Right Click On My Computer.

3) Open up properties.

4) Go to Advanced Option.

5) Now select Settings of Performance.

6) Again Click on the Advanced Button which is shown In the popup Window.

7) Now click on Change button shown in Virtual memory.

8) Now select the available memory of your removable USB/Pendrive.

9) Set the value and apply the changes.




10) Restart your PC/Laptop and Thus you are done.

___________________________________________________________________________________________



Method 2 : Using eBoostr Software to Convert USB/Pendrive into RAM ...

A clean software is also present for this purpose which is known as eBoostr, It will convert your removable device memory into RAM and thus computer speed will be increased to a large extent.


After Downloading Just Run it and Use as its usage is quite simple that’s why no guide is necessary for it.


The software is very handy in the sense that it is just 5MB to download. It supports Windows XP, Windows 2000 and Windows 2003 and is available in 36 languages. It requires USB 2.0 drive or memory card for operation and USB 1.1 is not supported as they tend to be very slow and don’t work at required speed. So, in short Pentium four is better for its usage. :)

Bandwidth Stealer For Fast Browsing (using netcut v2.8)



If you are in your school's computer lab or in home , this software will always help you in your work . It is common thing to have many computer's connected with one device for internet and it causes your bandwidth to fall down . Here is a software called netcut which cuts the one's connection in such a crucial condition.When it cuts the one's connection , it automatically increases bandwidth of your connection which will let you work more easily and fastly.


___________________________________________________________________________________________


Using Netcut :-

1: Download net cut.

2: Extract the software and install it.

3: Now open netcut software and a window will pop-out showing you connected routers.

4:  Just toggle to the computer which you want to cut off like this photo:



5: And that's it.Now you are free to eat up every last bit of bandwidth. Enjoy :)